Watch Adjust
Adjust your strap
Your ZEPH ships longer than most wrists need. The adjusting tool is free in the box. Five minutes.
What you need
Free in the box, under the cushion.
The pins are small. Do not lose them.
One link at a time. Try it on between each.
Prefer not to? Any watch shop sizes it in minutes. Bring the tool.
Look inside the bracelet
Each removable link has a small engraved arrow. It shows the direction the pin comes out. Push the wrong way and the pin bends.
Remove the same number of links from each side so the clasp stays centred.
Seat the bracelet in the tool
Line the tip up with the pin hole, dead centre. Off centre, it marks the link instead of moving the pin.
Turn clockwise until the pin is clear, then pull the halves apart. Keep the link and the pin.
Close the bracelet
Join the two ends and push the pin back in from the same side it came out, against the arrow.
If it sits proud, press it flush with the base of the tool. Then tug the joint to check it holds.
The whole thing, start to finish
Same three steps on a real bracelet.
How it should sit
One finger under the bracelet, no more. It should slide about a centimetre. Size it in the afternoon, wrists swell through the day.
Still stuck?
Send us a photo of where you are. We reply within one business day.
Contact usAll Watches
